S5.3 Cube

Call 01473 621 929 for Prices

Trantec, the UK wireless microphone manufacturer, has introduced the latest addition to their popular Racked’n’Ready range. Compact, rugged, and extremely user-friendly, the S5.3 Cube has been designed to fill the needs of wireless mic users who prefer not to be overwhelmed with complex arrays of sound equipment. This 1/2U system comes ready installed with 4 UHF channels of Trantec S5.3 which can operate up to 12 simultaneous channels within an 11MHz window (854-865MHz). An antenna distribution unit is included, and built-in mains distribution provides power to each receiver and the ADU. For larger events a remote antenna kit is also available. Both handheld and beltpack transmitters operate for up to 10 hours on a single AA battery, and computer monitoring software means that users benefit from realtime system status. The S5.3 is already recognised for its versatile performance and is proving particularly popular with semi-pro bands and theatre productions. Despite its small proportions, the system promises a powerful set of features and is suitable for venues of any size.

Product overview High quality true diversity operation Up to 12 Simultaneous Channels Frequency scan facility USB based computer monitoring Simple programming of transmitters via Infra-red Credit card size beltpack transmitters

Single AA operation of transmitters with battery life of over 10 hours Professional metal enclosures for both transmitter and receiver Antenna Distribution Built In Power Supply Professional Flight Case Tested & Ready To Go

Fully assembled package includes:

• 4 x 5.3 receivers

• 4 x 5.3 transmitters in any combination of handheld or beltpack (includes MIC/X2 lapel microphone)

• Antenna distribution unit (ADU), appropriate for attached receivers

• Rack mounting kits/trays

• Power supply allowing one power cable for assembled rack

• 2 x 10m antenna cables

• 2 x antennae

• 2 x antenna head amplifiers

• 2 x antenna stands

Technical Specification

S5.3 System Specification

RF Frequency range:	854-865MHz (11MHz window)
AF Frequency response:	50Hz – 20KHz

Fully meets the requirements of ETSI 300-422 and FCC Pt74.

S5RX Receiver

Fully Synthesised UHF dual conversion Receiver with features including. Graphic LCD, display jog wheel, IR data link and headphone monitor.

Type:	Dual Diversity featuring PLL Dual conversion receivers
IF Freq:	1st IF 55.875MHz, 2nd IF 10.7MHz
Sensitivity:	<1 μV/12dB SINAD
1st Image:	>7dB
RSSI range:	10 steps 30dB range
Antenna Inputs:	TNC 50 Ohm
Output Level:	XLR Line +15dBm max. Mic -25dBm max. Unbal 1/4" jack socket +9dBm max
Rear Panel connections:	RF input/output, AF XLR and ¼” Jack output, PC USB port, DC jack.
Antenna Phantom:	9V @ 60mA short circuit protected on each RF port
Bank Specification:	9 Banks x 12 Channels
Infra-Red Link:	Range 15cm max
Computer Interface(USB):	Monitoring of RF, AF and Transmitter Battery status
Rear Panel connections:	RF input, AF XLR and ¼” Jack output, PC USB port, DC jack.
Power Consumption:	300mA @ 12Vdc nominal
Enclosure type:	19” 1U  ½ width Rack.

S5LTX Beltpack Transmitter

Fully Synthesised UHF Transmitters with features including: Integral LCD, IR data link, Battery status indicator, Audio multistage attenuator.

Battery Life:	10Hrs Typical, AA Single cell.
Beltpack AF connector:	4 pin mini XLR.
Audio Input range:	-20dbm - +7dBm
Microphone Bias Voltage:	> 5V
RF Bandwidth:	< 200KHz
Antenna Type:	¼ Wave Whip.
Enclosure type:	Full metal construction

S5HTX Handheld Transmitter

Fully Synthesised UHF Transmitters with features including: Integral LCD, IR data link, Battery status indicator, Audio multistage attenuator, Microphone mute switch.

Battery Life:	10Hrs Typical, AA Single cell.
Handheld Cartridge type	High quality directional Dynamic or Condenser capsule.
RF Bandwidth:	< 200KHz
Antenna Type:	Integral
Enclosure type:	Full metal construction